top of page

SHADE CARDS - ASIAN PAINTS

"Har Ghar Kuch Kehta Hai"

Scroll Down

Untitled-1.jpg

Tractor Shade Card

Asian Paints Tractor shade card offers a wide range of vibrant colors for a flawless and appealing finish.

Direction For Use

PREPARING THE WALL SURFACE

1. CLEAN: Use emery paper 180 to remove loose particles.

2. PRIMING: Apply 1 coat of Asian Paints Trucare Interior Wall Primer (ST/WT), Allow to dry for 6-8 hours.

3. SMOOTHEN: Fill dents with thin coats of Asian Paints Trucare Acrylic Wall Putty. Allow to dry for 4-6 hours.

4. PRIMING: Apply another coat of Asian Paints Trucare Interior Wall Primer (ST/WT). Allow to dry for 6-8 hours.

​

TRACTOR EMULSION

1. Mix 500-750 ml of water to 1 tre of Tractor Emulsion.

2. Apply 2-3 coats of Tractor Emulsion with 4-6 hours between each coat.

​

TRACTOR UNO ACRYLIC DISTEMPER OR TRACTOR AQUALOCK

1. Mix 600-650 ml of water with 1 kg of Tractor Uno Acrylic Distemper or Tractor Aqualock.

2. Apply 2-3 coats keeping an interval of 4-6 hours for Tractor Uno Acrylic Distemper and Aqualock.

Royale Shade Card

Asian Paints Royale Luxury Emulsion is an exquisite paint that transforms your walls with opulent finishes besides offering world class performance.

Direction For Use

1. Sand the surface with Sand Paper No. 180 to remove loose particles or dirt and wipe clean.

2. Apply 1 coat of Asian Paints TruCare interior wall primer and allow drying for 4 - 6 hours.

3. Smoothen the surface with coats of Asian Paints Trucare Acrylic Wall Putty. Allow drying for 4 - 6 hours. Sand the surface with Sand Paper No. 180 and wipe clean.

4. Apply another coat of Asian Paints TruCare interior primer and allow drying for 4 - 6 hours. Sand the surface with sand paper No. 320 or 400 and wipe clean.

5. Thin 1 litre of Royale Luxury Emulsion with 400-500 ml of water.

6. Apply 2 – 3 coats of Royale Luxury Emulsion with 4 – 6 hour gap between each coat using a felt roller. For best results, use Asian Paints Royale Roller for Application.

Royale.jpg
Apcolite.jpg

Apcolite Premium Shade Card

Apcolite premium emulsion comes with stain guard which ensures effortless premium emulsion cleaning of stains from the wall. 

Direction For Use

  1. Cleaning: Sand the surface with Sand Paper 180 to remove loose, cracked or flaked paint, paint dust, dirt grease. Wipe clean.

  2. Primer: Apply a coat of Asian Paints TruCare Interior Wall Primer (ST / WT). Allow to dry for 6 – 8 hrs.

  3. Putty: Smoothen the surface by filling dents with thin coat of Asian Paints TruCare Acrylic Wall Putty. Allow drying for 4 – 6 hrs. Sand with Sand Paper 180 and wipe clean.

  4. Primer: Apply a coat of Asian Paints TruCare Interior Wall Primer (ST / WT). Allow to dry for 6 – 8 hrs.  Sanding: Light sand with sand paper 320 / 400 and wipe clean.

  5. Top coat: Thin 1 litre of Apcolite Advanced Emulsion with 400 – 500 ml of water. (In case of Apcolite Premium Emulsion mix 1 litre with 600 – 650 ml of water) Apply 2-3 coats of paint with an interval of 4 hrs between successive coats. 

Enamel Shade Card

Asian Paints Enamel shade card offers a durable and glossy range of colors for a smooth and long-lasting finish.

Direction For Use

1. Surface Preparation:
   - Ensure that the surface is clean, dry, and free from any dirt, dust, grease, or loose particles.
   - If there are any cracks or holes, fill them with an appropriate filler and smoothen the surface.

2. Primer Application (if required):
   - If the surface is new or has not been previously painted, apply a suitable primer recommended by Asian Paints.
   - Follow the instructions on the primer can for proper application and drying time.

3. Stirring the Enamel:
   - Open the can of Asian Paints Enamel and stir the paint thoroughly using a clean and dry stirrer.
   - Stir until the paint attains a smooth and uniform consistency.

4. Application:
   - Use a high-quality brush, roller, or spray gun for applying the enamel.
   - Apply the paint evenly, using long, even strokes in one direction.
   - Maintain a wet edge while painting to avoid lap marks.
   - For a smooth finish, avoid excessive brushing or rolling.

​

Apcolite_2.jpg
Apex.jpg

Ace & Apex Shade Card

Asian Paints Ace & Apex Shade Card offers a diverse selection of vibrant colors, ensuring a perfect blend of durability and aesthetics.

Direction For Use

APEX TILE GUARD - DIRECTIONS FOR USE

  1. Clean the surface thoroughly using a wire brush and remove loose aterial from the surface. Growths of fungus, algae or moss should be removed by wire brushing and water.

  2. In case of dents and holes use Asian Paints TruCare Wall Putty or white cement and fine sand in the ratio 1:3

  3. Apply 2-3 coats of Asian Paints Apex Tile Guard, a diluting 1 litre Tile Guard with a maximum of 300 ml of water.

  4. A gap of 4-6 hrs should be maintained between painting two successive coats.

  5. This product is not recommended for use on glazed, non-porous or very smooth tiles or masonry surfaces.

​

DIRECTIONS FOR USE

  1. Surface Preparation: Ensure that the surface to be painted is free from loose paint, dust, grease and algae, by vigorous wire brushing and cleaning with water, followed by a coat of an effective bio-wash solution. Asian Paints TruCare.

  2. Surface Smoothening/Crack Filling: Walls may have slight irregularities and imperfections such as holes, dents and cracks. Asian Paints TruCare Wall Putty is recommended to level minor undulations and smoothen the wall surface. Asian Paints SmartCare Crack Seal is recommended for cracks up to 3mm in width.

  3. Primer Coat: Before application of the topcoat, it is necessary to apply a coat of an exterior durable primer for better adhesion and to increase the durability of the paint.

  4. Topcoat: Apply 2-3 coats of Asian Paints Ace/Apex by diluting 1 litre with a maximum of 400 ml of water. Ensure a gap of 4-6 hrs between the coats. Apply a third coat on horizontal surfaces for additional protection.

Apex Ultima Shade Card

Asian Paints Royale Luxury Emulsion is an exquisite paint that transforms your walls with opulent finishes besides offering world class performance.

Direction For Use

1. Sand the surface with Sand Paper No. 180 to remove loose particles or dirt and wipe clean.

2. Apply 1 coat of Asian Paints TruCare interior wall primer and allow drying for 4 - 6 hours.

3. Smoothen the surface with coats of Asian Paints Trucare Acrylic Wall Putty. Allow drying for 4 - 6 hours. Sand the surface with Sand Paper No. 180 and wipe clean.

4. Apply another coat of Asian Paints TruCare interior primer and allow drying for 4 - 6 hours. Sand the surface with sand paper No. 320 or 400 and wipe clean.

5. Thin 1 litre of Royale Luxury Emulsion with 400-500 ml of water.

6. Apply 2 – 3 coats of Royale Luxury Emulsion with 4 – 6 hour gap between each coat using a felt roller. For best results, use Asian Paints Royale Roller for Application.

Apex Ultima.jpg
Royale_1.jpg

Royale Play

Asian Paints Royale Play is a co-polymer emulsion based paint for interior application. It will not run or sag on vertical surfaces.

Direction For Use

  1. Surface Preparation:
       - Ensure that the surface is clean, dry, and free from any dust, grease, or loose particles.
       - Repair any cracks or imperfections on the surface and smoothen it for a uniform finish.

  2. Base Coat Application:
       - Apply a suitable primer or base coat recommended by Asian Paints as per the product instructions.
       - Allow the base coat to dry completely before moving on to the next step.

  3. Royale Play Application:
       - Select the desired Royale Play design and finish from the     range of available options.
       - Follow the specific instructions provided with the chosen             Royale Play variant for application techniques and tools             required.
       - Use specialized tools like rollers, brushes, or spatulas to create the desired texture and pattern on the surface.

Royale Play Shade Card

Asian Paints Royale Play Collection Shade Card showcases a wide array of exquisite textures and finishes, allowing you to create stunning and unique wall designs.

Direction For Use

1. Open the Royale Play Collection Shade Card to reveal a range of exquisite textured finishes.

2. Explore the various patterns and designs available to choose the desired effect.

3. Note down the name or code of the selected Royale Play design for future reference.

4. Visit our Asian Paints store with the chosen code to place your order.

5. Our knowledgeable staff will assist you in selecting the appropriate Royale Play product.

6. Follow the specific application instructions provided on the selected Royale Play product label.

7. Prepare the surface as per the recommended guidelines before applying Royale Play.

8. Use the recommended tools and techniques to achieve the desired texture and finish.

9. Allow sufficient drying and curing time between coats for the best results.

10. After applying Royale Play, step back and admire the captivating textured effect it brings to your space.

Royale Play.png
bottom of page